Grindometer
Fineness of Grind Gauge
Hegman Gauge
ASTM D333 ASTM D1210 ASTM D1316
ISO 1524, DIN 53203, DIN EN 21524
BS 3900-C6 FTMS 141a 4411.1
PR NF T30-046 AS/NZS 1580.204.1

Tuotekuvaus:

Qualtech-tuotteet – teollisuuden tarkkuus Grindometer on ammattilainen Fineness of Grind Gauge to measure the particle size of suspensions including paint, coatings, ink, pigments, paper, ceramics, plastic, pharmaceuticals, food products and related sample materials. This professional Grindometer consists of a precision engineered hardened stainless steel Grindometer Base with a Single Channel, Double Channel tai Wide Channel carved into its surface combined with a precision engineered Scraper Blade.

Tämä ammattilainen Fineness of Grind Gage presents precision graduations in Microns, Mils, NS (Hegman) on the top surface to offer a user-friendly application and comfortable reading of sample test results.

This precision Grindometer and Fineness of Grind Gauge is used to indicate the Fineness of Grind or the presence of coarse particles or agglomerates in dispersions and suspensions – heterogenous mixtures containing solid particles to control the production, storage, and application of products which are milled or ground during the production.

The liquid sample is poured into the deep end of the Channel or Groove and is distributed with the Scraper Blade towards the flat or shallow end of the Channel carved into the Grindometer until the largest particle size present in the sample liquid is equivalent to the depth of the groove of the Fineness of Grind Gauge.

Tämä tarkkuus Hegman Gauge determines the largest particle size and possible irregularities present in dispersions and suspensions instantly, efficiently and with the use of only a very small amount of the liquid sample.

This professional Fineness of Grind Gauge is designed and engineered in accordance with international test standards including:

• ASTM D333 (Selkeiden ja pigmentoitujen lakkojen standardiohje)
• ASTM D1210 (Pigmentti-sideainejärjestelmien dispergoitumisasteen standarditestausmenetelmä Hegman-tyyppisellä mittalaitteella)
• ASTM D1316 (Painovärien jauhatusasteen standarditestausmenetelmä NPIRI-jauhatusmittarilla)
• ISO 1524 (Maalit, lakat ja painovärit – Jauhatusasteen määrittäminen)
  
• DIN EN 21524 (Maalit ja lakat – Jauhatusasteen määrittäminen)
  
• DIN 53203 (Maalien ja muiden pigmentti-sideainejärjestelmien testaus; dispersiotason karkeuden (tai hienouden) arviointi grindometrin avulla)
• BS 3900-C6 (Maalien testausmenetelmät – Jauheisuuden määrittäminen)
• PR NF T30-046 (Maalit, lakat ja painovärit – Jauhatusasteen määrittäminen.)
• AS/NZS 1580.204.1 (Maalit ja niihin liittyvät materiaalit – Testausmenetelmät – Jauhatusaste)
• FTMS 141a 4411.1