Produktbeskrivelse:
Qualtech-produkter – Industri Canadisk standardapparat til måling af friskhed er en professionel Freeness of Pulp Tester engineered with the Canadian Standard Method in mind to measure the flow rate of diluted suspensions of pulp and aqueous samples in accordance with the Canadian Standard Method og TAPPI T227.
This precision engineered Canadisk standardapparat til måling af friskhed er en professionel Paper Pulp Suspension Test Equipment to determine the level of pulping of pulp when manufacturing paper and cardboards.
Dette Canadisk standardapparat til måling af friskhed is designed and engineered offering the newest technology combined with a precision engineered Mesh, a precision engineered Drainage Chamber, user-friendly sample handling, a precision engineered and calibrated Orifice, high accuracy & high precision, an ergonomic design, reliable performance, longevity and much more.
Denne præcision Canadian Standard Freeness Tester is user-friendly, easy to clean and made of high quality materials offering a reliable performance and an ergonomic design.
This professional Canadian Standard Freeness Tester is designed and engineered in accordance with international test standards including:
- TAPPT T227 om-21 (Freeness of pulp (Canadian standard method))
- ISO 5267-2 (Pulps - Determination of drainability - Part 2: Canadian Standard freeness method)
- BS 6035-2 (Methods for determination of the drainability of pulp. 'Canadian Standard' freeness method)
- AS/NZS 1301.206s (Methods of test for pulp and paper - Part 206s: Freeness of pulp)
- CPPA C1
- SCAN C21
Canadian Standard Freeness Tester – Test Method:
Freeness is a quantitative measure of the Drainage Behavior of a diluted Pulp Suspension containing 3 g of absolutely dry fiber per 1 L of water. It reflects two critical fiber characteristics:
- Surface condition and
- Degree of fiber swelling
Because drainage behavior is sensitive to process variables, freeness results depend strongly on pulp preparation, temperature and water quality.
Den Canadian Standard Freeness (CSF) method evaluates the Drainage Performance of a Pulp Suspension at a controlled concentration of 0.3 ± 0.0005% and a test temperature of 20 °C. Under standardized conditions, the CSF value is defined as the volume of filtrate (mL) discharged through the side orifice of this professional Canadisk standardapparat til måling af friskhed.
Dette Precision Canadian Standard Freeness Tester is engineered for repeatable, high‑accuracy drainage measurements and consists of:
Drainage Chamber
Manufactured from high‑grade stainless steel for dimensional stability and corrosion resistance.
The base of the Main Cylinder incorporates a precision‑machined stainless steel Sieve.
An airtight bottom Sealing Cover, mounted on a hinge and secured with a sealing bracket, ensures consistent test conditions.
A sealed stainless steel Top Sealing Cover maintains controlled internal geometry during sample loading.
Drainage Funnel Assembly
A precision‑machined Conical Funnel directs filtrate flow with minimal turbulence.
Both the Main Cylinder and precision engineered Funnel are supported by rigid stainless steel Brackets designed to eliminate vibration and mechanical drift.
Operational Features
After the Pulp Suspension is introduced, the operator opens the Bottom Sealing Cover og Air Valve, initiating controlled drainage.
Optional Dual Level Bubbles—one on the Funnel Lid and one on the Lower Support—ensure this professional Canadisk standardapparat til måling af friskhed is perfectly leveled prior to testing, a critical factor for measurement repeatability.
All structural components are fabricated from high‑quality stainless steel, providing ergonomic design, long‑term stability, mechanical robustness and reliable performance in laboratory and industrial environments.
Canadian Standard Freeness Tester – Features:
- Newest Design
- Instant Canadian Standard Freeness Test
- Præcisionsfremstillet tragt
- Precision engineered Mesh
- Precision engineered Drainage Chamber
- Precision engineered Orifice
- Brugervenlig applikation
- Brugervenlig håndtering af prøver
- Easy Cleaning System
- Precision engineered Sieve
- Precision engineered Stainless Steel Stand
- Precision engineered Stainless Steel Accessories
- Høj nøjagtighed og høj præcision
- Ergonomisk design
- Pålidelig ydeevne og lang levetid
- Engineered in accordance with international test standards including TAPPI T 227 om-21, ISO 5267-2, BS 6035-2, AS/NZS 1301.206s, CPPA C1, SCAN C21
Freeness of Pulp Canadian Standard Tester - Specifications:
| Model | QPI-CSFT2800 |
|---|---|
| Nyt design | Ja |
| Canadian Freeness of Pulp Test | Ja |
| Professionel anvendelse | Ja |
| Måleområde | 0 - 1000 CSF |
| Precision engineered Mesh | Ja |
| Precision engineered Drainage Chamber | Ja |
| Precision engineered Orifice | Ja |
| Brugervenlig applikation | Ja |
| Brugervenlig håndtering af prøver | Ja |
| Easy to clean | Ja |
| Precision engineered Stainless Steel Accessories | Ja |
| Precision engineered Stainless Steel Stand | Ja |
| Høj nøjagtighed og høj præcision | Ja |
| Ergonomisk design | Ja |
| Pålidelig ydeevne og lang levetid | Ja |
| Engineered in accordance with international test standards including TAPPI T 227, ISO 5267-2, BS 6035-2, AS/NZS 1301.206s, CPPA C1, SCAN C21 | |
Canadian Standard Freeness Tester – Included items:
- Canadisk standardapparat til måling af friskhed
- Tilbehør
- Kvalitetscertifikat
- Omhyggeligt kalibreret
- Brugervejledning
- Udvidet garanti
Få oplysninger nu om produkter, priser, teknisk support og professionelle tjenester.
En af vores specialister vil snart svare på din forespørgsel. Du kan også kontakte os via vores kontaktoplysninger i USA, Australien eller Storbritannien.
English
Danish
Dutch
Finnish
French
German
Greek
Irish
Italian
Luxembourgish
Norwegian
Norwegian
Portuguese
Scottish Gaelic
Spanish
Welsh