Profwr Torriad X
X Cut Test Kit
X Cut Template
X Cut Adhesion Tester
Paint X Cut Tester
Paint Adhesion X Cut Tester
X Cut Adhesion Test Kit
St. Andrews Cross Cut Test
St. Andrews X Cut Test
Paint Adhesion X Cut Ruler Test Kit
Paint Adhesion X Cut Guide Test Kit
ASTM D3359 Method A X Cut Test Kit
ASTM D3359 Method A X Cut Ruler
ASTM D3359 Method A Cross Cut Ruler
Single Blade ASTM D3359 Method A Cross Cut Ruler
Prawf Gludiant â Theip
ASTM D3002 ASTM D3359 ASTM D6677
BS 3962-6 ISO 2409 ISO 16276

Disgrifiad o'r cynnyrch:

Diwydiant Cynhyrchion Qualtech Profwr Torriad X wedi'i beiriannu'n fanwl gywir Paint X Cut Test Kit ac Paint Adhesion X Cut Guide i bennu ar unwaith berfformiad gludiant paent a gorchuddion a gymhwysir ar arwynebau sylfaen a samplau.

Y X Cut Paint Adhesion by Tape Test evaluates the Adhesion Performance of paint and coatings and the resistance of paint and coatings to separate from the sample surface.

Y X Cut Adhesion Test is performed by cutting a X pattern with a 30° - 45° angle into the coating. The coating is completely penetrated by the cut. The cut is cleaned with the included 3M adhesive tape or cleaned with the included brush. Test results are visually evaluated with the included precision Magnifying Glass in accordance with the coating thickness. The Paint X Cut Test is also referred to as the St. Andrews X Cut Test.

Y proffesiynol hwn Pecyn Prawf Torri Adlyniad X combines three different tests in one Prawfydd Glynu Paent:

• X Cut Test 35°
• 2 mm
• 3 mm

Y manwl gywirdeb hwn X Cut Paint Adhesion Template Kit is made of high-quality materials and all accessories are available to ensure the highest precision and the longevity of your Paint Adhesion X Cut Test Kit.

Y St. Andrews X Cut Adhesion Test is an instant test method to professionally determine the Adhesion Performance of paint and coatings applied on substrates and sample surfaces and it is suitable to test Single-Coating Systems and Multi-Coating Systems.

This professional Paint Adhesion X Cut Test Kit is designed and engineered in accordance with international test standards. including:

• ASTM D3002 (Canllaw Safonol ar gyfer Gwerthuso Gorchuddion a Roiir ar Blastigau (Tynnwyd yn ôl 2016))
• ASTM D3359 (Dulliau Prawf Safonol ar gyfer Mesur Adlyniad drwy Brawf Tâp)
• BS 3962-6 (Dulliau prawf ar gyfer gorffeniadau dodrefn pren. Asesu ymwrthedd i ddifrod mecanyddol)
• ASTM D6677 (Standard Test Method for Evaluating Adhesion by Knife)
• ISO 2409 (Paentiau a gwernisau — Prawf traws-dorri)
• ISO 16276 (Amddiffyn strwythurau dur rhag cyrydiad drwy systemau paent amddiffynnol — Asesiad o ludiad/cydlyniad (cryfder torri) gorchudd, a meini prawf derbyn — Rhan 2: Profi traws-dorri a phrofi X-dorri)