Produktbeskrivning:
Qualtech Products Industry Dur-O-Test is a professional DIN 55656 Hardness Pen to instantly determine the Hardness, the Wear Resistance and the Scratch Resistance of Paint Films and Coatings attached to sample surfaces and substrates on the go.
Detta proffs Hardness Pen is suitable for a wide range of samples and sample surfaces including even surfaces, convex surfaces, concave surfaces of larger and smaller size.
De Dur-O-Test is performed by adjusting the Hardness Level of the Pen-Tip with the continuously adjustable Hardness Level Dial. After selecting the Hardness Level a line with a length of around 10mm is marked on the Coating Surface or Sample Surface with the Pen-Tip at a speed of approximately 10mm/sec. This marking is visually examined for scratches or damages in the Surface Coating or the Sample Surface to instantly determine the Hardness Level of the Coating or the Sample Surface.
This precision DIN 55656 Hardness Pen is engineered to monitor and to test the Mechanical Resistance, the Surface Hardness and the Scratch Resistance of Surface Coatings for research and quality management at your laboratory and on the go.
Depending on the specific test requirements there is a variety of different test methods suggested for the measurement of the Coating Hardness and Coating Scratch Resistance. One of the most used test methods is the Hardness Test according DIN 55656, the Hardness Pen Test.
Detta proffs DIN 55656 Dur-O-Meter is designed and engineered offering a precision engineered Spring System combined with a precision engineered Pen-Tip, a continuously adjustable Hardness Level, high quality materials, high accuracy and high precision, a user-friendly application, user-friendly sample handling, a Carrying Box, an ergonomic design, reliable performance, longevity and much more.
This professional DIN 55656 Dur-O-Test Hardness Pen is designed and engineered in accordance with international test standards including:
Dur-O-Test hårdhetspenna - Funktioner:
- Nyaste tekniken
- Instant DIN 55656 Dur-O-Test
- Continuously adjustable Spring System
- Precision engineered Pen-Tip
- Durable Pen-Tip made of high quality materials
- Precision engineered and calibrated
- Användarvänlig hårdhetsjustering
- Användarvänlig applikation
- Användarvänlig provhantering
- Hög precision och hög precision
- Ergonomisk design
- Pålitlig prestanda och livslängd
- Konstruerad i enlighet med internationella teststandarder inklusive DIN 55656
Dur-O-Test Hardness Pen - Specifikationer:
| Modell | QPI-DINHP3800 | QPI-DINHP6800 |
|---|---|---|
| Nyaste tekniken | Ja | Ja |
| Omedelbar DIN 55656 Ythårdhetstest | Ja | Ja |
| Kontinuerlig hårdhetsjustering | Ja | Ja |
| Skrapstift | #1: Tungsten Carbide Pin #2: Tungsten Carbide Pin #3: Tungsten Carbide Pin #4: Fjädermekanisk stift | |
| Stift | Ø 0,75 mm sfärisk Bosch | Ø 0,75 mm sfärisk Bosch |
| Valfria stift | Ø 0,5 mm sfärisk Opel Ø 1,0 mm sfärisk ISO 1518 |
|
| Fjädermekanik | 0N - 3N 0N - 10N 0N - 20N | |
| Pålitligt fjädersystem | Ja | Ja |
| Precision engineered Pen-Tip | Ja | Ja |
| Slitstark pennspets | Ja | Ja |
| Precisionskonstruerad och noggrant kalibrerad | Ja | Ja |
| Tillverkad av högkvalitativa material | Ja | Ja |
| Användarvänlig applikation | Ja | Ja |
| Användarvänlig hårdhetsjustering | Ja | Ja |
| Användarvänlig provhantering | Ja | Ja |
| Hög precision och hög precision | Ja | Ja |
| Ergonomisk design | Ja | Ja |
| Pålitlig prestanda och livslängd | Ja | Ja |
| Konstruerad i enlighet med internationella teststandarder inklusive DIN 55656, ISO 1518 | ||
DIN hårdhetspenna - tillgängliga tillbehör:
| Modell | Beskrivning |
|---|---|
| QPI-DINHP3800075 | Ø 0,75 mm sfärisk Bosch ingår |
| QPI-DINHP6800075 | Ø 0,75 mm sfärisk Bosch ingår |
| QPI-DINHP680005 | Ø 0,5 mm sfärisk Bosch tillval |
| QPI-DINHP680010 | Ø 1,0 mm sfärisk ISO 1518 valfritt |
| QPI-DINHP38003N | Fjädermekanik 0N - 3N |
| QPI-DINHP380010N | Fjädermekanik 0N - 10N |
| QPI-DINHP380020N | Fjädermekanik 0N - 20N |
| QPI-DINHP68003N | Fjädermekanik 0N - 3N |
| QPI-DINHP680010N | Fjädermekanik 0N - 10N |
| QPI-DINHP680020N | Fjädermekanik 0N - 20N |
DIN 55656 Hardness Pen – Inkluderade föremål:
- Precision Hårdhet Penna
- Tillbehör
- Bärlåda
- Kvalitetscertifikat
- Noggrant kalibrerad
- Kalibrerings certifikat
- Användarmanual
- Förlängd garanti
- Livstidssupport
Få information nu om produkter, priser, teknisk support och professionella tjänster.
En av våra specialister kommer att svara på din förfrågan inom kort. Alternativt kontakta oss via företagsuppgifterna i USA, i Australien eller i Storbritannien.
Svenska 
English 
Dansk 
Deutsch 
Ελληνικά 
Español 
Español de México 
Suomi 
Français 
Français du Canada 
Italiano 
Nederlands 
Português