ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

Όργανα δοκιμής βαφής και επίστρωσης

Πραγματικές αξίες για τους πελάτες και τους πελάτες μας

ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

Εξοπλισμός Βιομηχανικής Παραγωγής

Μηχανήματα βιομηχανικής κλίμακας για γραμμές παραγωγής

Αξιόπιστος εξοπλισμός για τα προϊόντα σας

ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

Χημικά για την παραγωγή χρωμάτων

Pigments & Binders & More

Χημικά για την υποστήριξη των προϊόντων σας

ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

Πραγματικές αξίες για τους πελάτες και τους πελάτες μας

Αξιόπιστη Ποιότητα

Επαγγελματική υπηρεσία

ΒΙΟΜΗΧΑΝΙΑ ΠΡΟΪΟΝΤΩΝ QUALTECH

Αξιόπιστη Ποιότητα

ΥΨΗΛΗ τεχνολογια

Επαγγελματική υπηρεσία

ΠΡΟΗΓ
ΕΠΟΜΕΝΟ

Εγγραφείτε εδώ για Ενημερώσεις & Νέα

Περιγραφή προϊόντος:

Βιομηχανία προϊόντων Qualtech Κύπελλο Πυκνότητας Πίεσης είναι κατασκευασμένο με ακρίβεια Όργανο μέτρησης πυκνότητας to measure the viscosity of aerated samples in accordance with the Pressure Cup Method. Aerated samples usually contain small air or gas bubbles including emulsions and related samples.

Κατά τη διάρκεια της δοκιμής δείγματος το δείγμα συμπιέζεται σε πίεση 150 psi (10,3 bar) για να ελαχιστοποιηθούν οι παγιδευμένες φυσαλίδες αέρα ή αερίου για να εξασφαλιστεί υψηλή ακρίβεια και υψηλή ακρίβεια των μετρήσεων του δείγματος.

Το αποτέλεσμα μέτρησης πυκνότητας υπολογίζεται από τον όγκο του κυλίνδρου και τη μάζα του δείγματος.

Αυτό το επαγγελματικό κύπελλο πίεσης έχει σχεδιαστεί και κατασκευαστεί σύμφωνα με τα διεθνή πρότυπα δοκιμών, όπως:

Pressure Cup Method - Application:

The Pressure Cup Method presented in ISO 2811-4:1997 "Paints and varnishes - Determination of density - Part 4: Pressure cup method," is a standardized Test Method for measuring the density of liquids, particularly paints and varnishes.

 

Materials and Equipment:

  • Pressure Cup QPI-PC1800: The Pressure Cup QPI-PC1800 is the specialized instrument designed for this specific test method. It is precision engineered and consists of a Stainless Steel Cup Body, a Stainless Steel Lid with a high-quality Pressure Release Mechanism and a calibration collar.
  • Distilled or deionized water: The purified water is used for the initial calibration step.
  • Environmental Chamber QPI-EC: ο Pressure Cup QPI-PC1800 and Sample Liquid are maintained at a specific temperature throughout the high-precision sample measurement.
  • Thermometer: An accurate thermometer is required to monitor the temperature of the water and Sample Liquid.
  • Balance: ο Analytic Balance QPI-120PS is used to weigh the empty Pressure Cup QPI-PC1800 and again later the Pressure Cup QPI-PC1800 filled with the Sample Liquid.

 

Pressure Cup Method - Preparations:

  • Cleaning and Drying: Ensure the Pressure Cup QPI-PC1800 is clean and completely dry before starting the measurement.
  • Pre-heating the Environmental Chamber QPI-EC: Set the Environmental Chamber QPI-EC to the required test temperature, usually 23°C as specified in the standard.

 

Calibration with Water:

  • Fill with Water: Almost completely fill the Pressure Cup QPI-PC1800 with previously boiled distilled or deionized water that has cooled to slightly below the test temperature, usually around 1°C cooler.
  • Secure the Lid: Tightly secure the Lid of the Pressure Cup QPI-PC1800.
  • Place in Environmental Chamber QPI-EC: Place the Pressure Cup QPI-PC1800 filled with water inside the Environmental Chamber QPI-EC and allow it to equilibrate to the test temperature.

 

Pressurization and Calibration:

  • Compress Water: Once at the test temperature, use the reliable Screw Mechanism απο Pressure Cup QPI-PC1800 to compress the water inside. Continue turning the screw until the calibration collar stops moving further. This ensures a consistent level of compression for the calibration step.
  • Weight measurement: Carefully remove the Pressure Cup QPI-PC1800 from the chamber and weigh it on the precision Analytical Balance QPI-PS120 and record this weight (M1).

 

Sample Measurement:

  • Empty and dry: Empty the water from the Pressure Cup QPI-PC1800 and ensure it is completely dry.
  • Fill with Sample Liquid: Carefully fill the Pressure Cup QPI-PC1800 with the Sample Liquid, for example, paint, varnish or other Sample Liquids. Ensure the Pressure Cup QPI-PC1800 is filled to the same level as with the water during the calibration.
  • Repeat pressurization: Repeat steps to pressurize the Pressure Cup QPI-PC1800 με το Sample Liquid and record the weight after removing it from the Environmental Chamber QPI-EC.

 

Calculations:

The density (ρ) of the test liquid is calculated using the following formula:

ρ = (M2 - M1) / (Volume of the cup x (1 - ρ_water))

M1 = Weight of the pressure cup filled with water
M2 = Weight of the pressure cup filled with test liquid
Volume of the Cup = This value is typically provided by the pressure cup manufacturer.
ρ_water = Density of water at the test temperature (consult a reference table for the specific value).

ο Pressure Cup Method ISO 2811-4 determines the density of various liquids, including paints and varnishes.

Pressure Cup ISO 2811 - Features:

  • Κύπελλο πίεσης ακριβείας
  • Σχεδιασμένο με ακρίβεια
  • Υψηλή ακρίβεια & υψηλή ακρίβεια
  • Κατασκευασμένο από υψηλής ποιότητας υλικά
  • Φιλική προς το χρήστη εφαρμογή
  • Αξιόπιστη απόδοση & Υψηλή επαναληψιμότητα
  • Σχεδιασμένο σύμφωνα με τα διεθνή πρότυπα δοκιμών, συμπεριλαμβανομένων των ISO 2811-4, BS 3900-A4
  • Εργονομικός σχεδιασμός & μακροζωία

Κύπελλο πικνόμετρου πίεσης – Προδιαγραφές:

ΜοντέλοQPI-PC1800
Όγκος κούπας πίεσης100 ml
Υλικό κούπας πίεσηςΑνοξείδωτο ατσάλι υψηλής ποιότητας
Συμπίεση κούπας πίεσης10 bar
Υψηλή ακρίβεια και υψηλή ακρίβειαΝαί
Εργονομικός σχεδιασμός και αξιόπιστη απόδοσηΝαί
Ανθεκτικό & ΜακροζωίαΝαί
Σχεδιασμένο σύμφωνα με τα διεθνή πρότυπα δοκιμών, συμπεριλαμβανομένων των ISO 2411-4, BS 3900-A22

Pycnometer Cup ISO 2811-4 – Συμπεριλαμβανόμενα είδη:

  • Κύπελλο πίεσης ακριβείας ISO 2411-4
  • Προσεκτικά βαθμονομημένο
  • Πιστοποιητικό ποιότητας
  • Πιστοποιητικό βαθμονόμησης
  • Εκτεταμένη Εγγύηση
  • Υποστήριξη δια βίου
  • Εγχειρίδιο χρήστη

 

Λάβετε πληροφορίες τώρα για προϊόντα, τιμές, τεχνική υποστήριξη και επαγγελματικές υπηρεσίες.
Ένας από τους ειδικούς μας θα απαντήσει στο ερώτημά σας σύντομα. Εναλλακτικά επικοινωνήστε μαζί μας μέσω των στοιχείων της εταιρείας στις ΗΠΑ, στην Αυστραλία ή στο Ηνωμένο Βασίλειο.

Δείτε μερικούς από τους αξιότιμους πελάτες μας:

Εργαστηριακά όργανα δοκιμής
ΜΠΛΟΥΖΑ
elΕλληνικά